How To Install A Pool Skimmer Basket

The weir is a flap that gets attached to your skimmer.

The weir rises and lowers to mirror the water level in the pool in order to allow debris into the skimmer and then keep it there.

Locate The Simmer Weir and Hardware pack and notice the iii smallest screws. These will adhere the weir onto your skimmer using a number two chip on your drill.

On the weir, there'south going to be three slots on ane end. You'll line those upwards with the 3 holes on the inside portion of the skimmer's frame.

The easiest way to do this is to insert the weir through the top opening of your skimmer and then line the weir slots upwardly to the skimmer holes.

Start by putting the first screw in the middle pigsty and tighten it using a drill or spiral driver.

Be cautious not to over tighten the screws as the skimmer and weir are plastic and can crack under too much pressure level.

Add the reaming two screws.

STEP two

Attach the Vacuum Port Cover to the Skimmer Faceplate

Locate the vacuum port cover and the quaternary small-scale spiral from your hardware pack (as well using a number 2 fleck on a power drill).

Secure the vacuum port embrace using this spiral to the very bottom of the skimmer's faceplate.

(Yous'll notice the hole on the faceplate for this particular is smaller than the rest.)

STEP iii

Adhere Gaskets to the Pool Wall

Locate the skimmer and vacuum port gaskets.

These items are designed for the pool wall to sit in between the flaps of the gasket to form a seal and prevent leaks around the skimmer and cleaner port.

When putting gaskets on the pool wall, work carefully as the edges of the wall are sharp.

Later on the skimmer gasket is on make sure all the holes on the gasket are lined up with the holes on the puddle wall.

Next add your cleaner port gasket to the smaller pigsty in the pool wall just under your skimmer opening.

Stride 4

Prep the Skimmer Faceplate

Using your fingers on top of the liner, locate the 2 peak corner holes of the skimmer gasket from the inside of the pool.

Pre-dial those two holes in the liner using the screws provided.

P RO TIP : Using a handheld screw driver for this tin be easier than just trying to push the screw through the liner past paw.

Once your first screw is through the liner, remove information technology and puncture the second hole, on the other elevation corner of the skimmer gasket.

Brand sure to remove the screws from these holes before standing.

Insert 2 screws into the upper two corners of the skimmer faceplate.

Line them up with the two holes you just pre-punched, and press the screws into the holes y'all made.

This will help go along the faceplate in place while you add together the skimmer.

STEP 5

Attach the Skimmer to the Wall

Accept someone assistance you by property the skimmer up to the outside of the pool wall and line up the tiptop two corners with the ones on the pool wall.

Secure the peak 2 corners of the skimmer to the pool wall using a manus held or cordless drill.

The skimmer should be secure plenty on the wall so yous can cease adding the rest of the screws yourself.

The spiral holes should exist lined upwardly perfectly once your meridian two screws are secured.

PRO TIP: A good setting for your cordless drill (if using) is a 10, possibly an eleven if you're working on a colder cloudy day (the liner will not give every bit much when not warm).

Don't tighten the any of the screws until all the screws are in place. Once all the screws have been added, go back and tighten each one.

Stride 6

Cutting the Liner

Next, you'll need to have a sharp razor blade or box cutter.

Carefully cut the liner out from the inside of the skimmer'south faceplate.

Do the aforementioned for the within  of the vacuum cleaner port.

Stride seven

Adding the Skimmer Accessories

Add your skimmer basket into the skimmer and the lid to the elevation opening.

Your skimmer installation is at present complete!

We hope this installation guide was helpful! For additional installation tips check out our resources center, learning hub or additional blog manufactures such as:

• 17 Steps to Installing Your Circular Above Footing Pond Pool
• INSTALLING AN In a higher place GROUND POOL WITH A SAND Base AND Foam COVE
• UNIBEAD SWIMMING POOL LINER INSTALLATION INSTRUCTIONS
• HOW TO Fill up YOUR SWIMMING Puddle WITH WATER!
• AUTOMATIC POOL CLEANERS: WHAT'Due south THE Departure?

Source: https://blog.royalswimmingpools.com/how-to-install-a-skimmer

Posted by: adamstright.blogspot.com

Share this post